Making wire leader

Solitario Lupo

Moderator
Ok guys I’m trying to figure this one out. Maybe someone on here can help me out as I was never very good at math. I bought the afw for leaders in 60lb it’s very hard to tie so I was thinking of using a crimping sleeve on it. The wire is.032”. The sleeve is a single. So do I double the wire diameter to fit.

This is just an idea what I was looking at.

 

Melvinp

Well-known member
I was just looking this same subject up last night but for stinger hooks on live bait jigs it gives you the single sleeve size requirement
 

Attachments

  • image.jpg
    image.jpg
    1.8 MB · Views: 3

Melvinp

Well-known member
You may want double wait a minute 60 is .032 the smallest double is .052 that’s a bit so at 60lds it should take a #4 single sleeve a double would start at 60 .032 and 90 at .048 these specks are coming out of my Barlows book
 
Last edited:

Solitario Lupo

Moderator
When you say tie do you mean like tying a knot? Why not simply barrel twist the wire to make an eye. .032 wire should be rather easy to twist. Like this, minus the plug
So the knot can be a clinch knot which I was trying so I took your idea but the only thing is when wrapping like this it gets to tight that I cannot slide the wire down to complete the knot.
 

Solitario Lupo

Moderator
You may want double wait a minute 60 is .032 the smallest double is .052 that’s a bit so at 60lds it should take a #4 single sleeve a double would start at 60 .032 and 90 at .048 these specks are coming out of my Barlows book
Number 4 in afw sleeves looks like they say. .071”.
 

Solitario Lupo

Moderator
Looks like 4 worked. 👍 👍 Thank uncle Mel:)
 

Attachments

  • 4BB60D18-9C62-4744-A9F0-8B920AFA107E.jpeg
    4BB60D18-9C62-4744-A9F0-8B920AFA107E.jpeg
    652.6 KB · Views: 4
  • 23BEA235-9534-401C-9534-D242F8D7CA52.jpeg
    23BEA235-9534-401C-9534-D242F8D7CA52.jpeg
    530.4 KB · Views: 4

Melvinp

Well-known member
Just got a hold of this not sure what to do with it yet but there’s always a use
 

Attachments

  • image.jpg
    image.jpg
    2.6 MB · Views: 6

Solitario Lupo

Moderator
If you do leaders out of it depending on how flimsy it is I would do barrel swivels. The reason I like the nylon coated wire is it’s just like line and bends easy. Just hope it works might still be to light.

My buddy gave me that 85lb wire from afw looks like it will work for the bigger heavier lures but anything light it might take away the action.
 
Top